Kawabe Product Line

TOP  >  Kawabe Products  >  Kawabe Product Line

Precision Press Parts

Alternator Parts

  • Alternator cooling fan parts
  • Fans are made using a multi-product Progressive die and a 250-ton press.
  • SECC (galvanized steel sheet)

Inter-cooler parts

  • Radiator-plates for inter-coolers
  • A 250-ton press is used. High precision is required.
  • Both sides are aluminum or one side may be clad material

Evaporator parts

  • Radiator-plates for evaporator
  • 60 punched protrusions are made in each plate. These parts are made using a progressive die and a 250-ton press.There are 6 types of hole shapes for the holes in the left edge, and one die can press all types of holes by changing a piece of the die.
  • Aluminum clad

Key-blanks

  • Key blanks for automobiles and motorocycles
  • Made of durable high-strength white nickel silver WNS7
  • WNS7, C2801, etc.

Key lock set parts

  • Automobile key lock set parts
  • Offered in a variety of types depending on the vehicle design and type.
  • Stainless steel, iron, etc

Insert Molded Parts

Power window switches

  • Connectors for automobile power window switches
  • Offered in a variety of shapes depending on the automobile type and design.
  • Pressed parts: thin-plated brass,  plastic parts PBT, etc.

Lever combination switches

  • Lever combination switch parts for automobiles
  • Used in switches that operate automobile wind shield wipers, turn signals, and other components.
  • Pressed parts: Copper or copper + silver plated materials,plastic parts: PA, etc.

Lever combination switches

  • Lever combination switch parts
  • Contacts, such as rivet-less caulking, are attached after molding.
  • Pressed parts: copper, plastic parts: PA, etc.

Automobile connectors

  • Connectors fro automobile electrical components
  • Contacts, such as rivet-less caulking, are attached after molding.
  • Pressed parts: copper, plastic parts: PA, etc.

Various parts

  • Contacts for automobiles
  • The contacts are made by caulking or making a dowel shape at the end with a press.
  • Pressed parts: phosphor bronze, etc. plastic parts: PBT, etc.

Steering sensors

  • Used in steering angle sensors assembled in automobile combination switches.
  • Although the material thickness is 0.4mm, from 30 to 120 square holes have been made along the circumference of the disks.
  • Pressed parts: stainless steel,  plastic parts POM, etc.

Shift switches

  • Used in shift lever units
  • These parts are used to attach wire harnesses.
  • Pressed parts: silver-plated copper, plastic parts PBT

Inhibitor switches

  • Automobile external shift switch parts
  • Primary and secondary molding is performed to provide a perfect seal.
  • Pressed parts: silver-plated copper, plastic parts PBT

Air conditioner switches

  • Automobile air conditioner switch parts
  • These terminals have the same pressed material thickness and width of 0.64mm.
  • Pressed parts: copper + tin plated material,plastic parts: PA

Air conditioner switches

  • Parts for automobile air conditioner switchers.
  • Used in air conditioner control switches.
  • Pressed parts: tin plated brass, plastic parts: PBT

Key sets

  • Parts used for starting the engine and locking the doors
  • Secondary molding or intermediate hold molding, etc, to provide a perfect seal in areas pressed after molding.
  • Pressed parts: copper,  plastic parts: PBT, PA, etc.

Contact spring caulking processing after insert molding

  • Lever combination switch parts
  • Contacts, such as rivet-less caulking, are attached after molding.
  • Pressed parts: Copper, plastic parts: PA, etc.

Insert molding with contacts caulked to pressed parts

  • Parts used in automobile power window swiches
  • Contacts are caulked and inserted after pressing.
  • Pressed parts: copper, plastic parts: PBT

Hoop molded parts

  • Parts for automobile lever combination switches
  • Pressed parts processed into a hoop shape are molded using an automatic feed.
  • Pressed parts: MSP1, plastic parts: PA, etc.

Other Products

Power semiconductor parts

  • Power control for industrial equipment motors, etc.
  • Multiple press parts are inserted simultaneously.
  • Pressed parts: PPS, plastic parts: nickel-plated copper

  • Power control for industrial equipment motors, etc.
  • Pressed parts processed in a hoop shape are tin plated over their entire surface area.
  • Plastic parts: PPS, pressed parts: Brass

  • Power control for industrial equipment motors, etc.
  • This is an example of 8 inserted parts
  • Plastic parts: PPS, pressed parts: pressed parts: nickel-plated coppe
Page top